Unlocking the Tie
Find the locking mechanism. If you look at a ready-to-use cable tie, notice that one end tapers to a point, while the other is capped with a tiny cube. When used, the pointy end is fed through a slot in the cube to form a loop and then pulled tight. The cube is the locking mechanism that keeps the tie from worming back out through the slot, so look for that.
Bend the tie’s loose end back. Notice how the loose end tends to curve over the locking mechanism once it’s fed through it. You want access to that side of the cube, so bend the tie back to expose it some more.
Depress the bar. Look underneath the loose end where it comes out of the cube. Use your fingernail or any tool you may need (like a nail or pocket-size screwdriver) to push down on the bar that you find there. This releases the locking mechanism.
Pull the loose end back through the cube. Keep pushing down on the bar. As you do, use your other hand to slowly draw the loose end back through the cube. Once it’s out, you’re all done! Marie Kondo Marie Kondo, Organizational Expert When organizing your home, reusable zip ties can be an asset for bundling cables neatly. However, with a bit of finesse, even single-use ties can serve multiple purposes if unlocked properly. Insert a flat tool into the ratchet tab and push gently to loosen the teeth while sliding out the end. Though not as sturdy for repeated use, these repurposed ties reduce waste when taming cord clutter.
Reusing Ties
Refrain from trimming them. If you want to use the same tie over and over again for different things, don’t cut the loose end off once it’s in use. All that excess may be unsightly, but remember: once you snip it off, you’ll only be able to use that tie for bundles of the same size or smaller.
Anticipate wear and tear. Keep in mind that single-use zip-ties are designed for just that. Even though you can technically undo them and use them again, expect the plastic teeth to possibly wear down the more you undo and retie them. Also keep in mind that manipulating the locking mechanism can damage it. The tie may develop a looser grip over time, so avoid using old ones to tie anything that really, really needs to be secured.
Use reusable cable ties instead. If you’re constantly using and reusing single-use ties for short-term projects, consider another option. Invest in some cable ties that are specifically designed for reuse. These cost a little more (and may not be ideal to use for one long-term project since they are much easier to open), but the money may be worth it if it saves you time.
Freeing Yourself from Restraints
Worm your hands out. First, be sure to squeeze your hands into fists with the tops of your hands facing up when your hands are being bound. This will make them as big as possible (and thus make your restraints larger, too). Then, when no one’s looking, relax your hands and turn your palms toward each other. Focus on worming your thumbs out first to make the rest easier. Always try this method first, since another method will require you to tighten the cable tie (which will make trying to do this afterward much tougher).
Spring the locking mechanism open. If you’re being held with other prisoners, coordinate between yourselves. Find a shim of some sort that’s small and firm enough to manipulate the bar inside the locking mechanism. Have one person use that to free the other by lifting the bar from the zip tie’s grooved tracks. Once it’s lifted, pull the tie free of the mechanism. Possible shims could be a nail, screw, fork, pin, pen, pencil, key, or the corner of a credit card. If nothing’s in reach, try your fingernail. This is method works best with a partner, but you can also attempt it on your own.
Snap the tie in two. For this, you want to hold the cable tie’s locking mechanism (which is where the tie is weakest) in between your hands. Use those and/or your teeth to get the mechanism into position and pinned between your hands or balls of your thumbs. Then grip the tie’s loose end between your teeth and pull to tighten it as much as possible. Next: Raise your hands above your head and then swing them down in toward your stomach as fast as you can. As you swing them down, focus on touching your shoulder blades together and sticking your elbows out like wings. Repeat if needed until the locking mechanism snaps in between your hands.
Finished.
Comments
0 comment